Reviews
Displaying 1301 to 1400 (of 2235 reviews)
PLA White 3D Printer Filament 1.75mm 1kg/roll
Where is my 5$ discount?
Date Added: 11/25/2022 by Victoria Aguirre
PLA Grey 3D Printer Filament 1.75mm 1kg/roll
Thanks for your support.
Date Added: 11/22/2022 by Geeetech Staff
PLA Grey 3D Printer Filament 1.75mm 1kg/roll
Merci Commande Reçue sous 8 jours._br_Thank you Order received within 8 days.
Date Added: 11/19/2022 by BOUSSELET Benoit/Corine
Geeetech 3D Touch V3.2 Auto Leveling Sensor
hello, pls create a support ticket on our website:
https://www.geeetech.com/index.php?main_page=ti...
Date Added: 11/18/2022 by Geeetech Staff
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Is there a firmware/Marlin for my G2S Pro with an updated GT2560 Rev A board and the 3D Touch v3.2? ...
Date Added: 11/17/2022 by Phil Delf
GCB-2 UV Resin Curing Light Box
Ok, you can just forget it and place a new order whenever you need it.
Date Added: 11/10/2022 by Geeetech Staff
Geeetech 3D Touch V3.2 Pro Auto Leveling Sensor
Hello, yes, it can be used.
Date Added: 11/10/2022 by Geeetech Staff
GCB-2 UV Resin Curing Light Box
PLease Delete this order. I need to wait to order it.
Date Added: 11/09/2022 by Jeffrey Petersen
Geeetech 3D Touch V3.2 Pro Auto Leveling Sensor
Hola, el nuevo 3D touch V3.2 Pro es compatible con la impresora A10T? Gracias_br_
Date Added: 11/08/2022 by Ricardo San Román
TPU Black 3D Printer Filament 1.75mm 1kg/roll
Hello, here is the parameters you need:
Nozzle temperature: 220-230℃
Bed temperature: 30-60℃
Prin...
Date Added: 11/08/2022 by Geeetech Staff
TPU Black 3D Printer Filament 1.75mm 1kg/roll
Hi, _br_Is there a profile to print TPU from Geeetech on the A20M?_br__br_
Date Added: 11/06/2022 by Armando da Rocha Agostinho Gonçalves
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Sorry for the problem you meet, if the other 2 screws, 2 nuts and 2 washers in the parcel are missin...
Date Added: 11/01/2022 by Geeetech Staff
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Will this work on my a30t?
Date Added: 10/28/2022 by Joseph Neupert
Geeetech 3D Touch V3.2 Auto Leveling Sensor
There is no mounting hardware to mount the bracket to the fan cage on the Ender 3 Pro. Only two scre...
Date Added: 10/28/2022 by Joe Shodds
PETG Black 3D Printer Filament 1.75mm 1kg/roll
hello Maximilian,
thanks for your support
Date Added: 10/26/2022 by Geeetech Staff
{4KG}PLA White 3D Printer Filament 1.75mm 1kg/roll
Hello, thanks for you supports.
Date Added: 10/24/2022 by Geeetech Staff
{4KG}PLA (Red + Yellow + Blue + Purple) 3D Printer Filament 1.75mm 1kg/roll
Hello, thanks for you supports.
Date Added: 10/24/2022 by Geeetech Staff
{4KG}PLA White 3D Printer Filament 1.75mm 1kg/roll
bien reçu
Date Added: 10/22/2022 by DANIEL DUGUE
{4KG}PLA (Red + Yellow + Blue + Purple) 3D Printer Filament 1.75mm 1kg/roll
bien reçu
Date Added: 10/22/2022 by DANIEL DUGUE
PETG Black 3D Printer Filament 1.75mm 1kg/roll
Hello, I bought this black PETG 4x, 3 rolls were glossy. When during printing the third roll was emp...
Date Added: 10/22/2022 by Maximilian Mosebach
Geeetech 3D Touch V3.2 Auto Leveling Sensor
hello, it can be used.
here is a video about how to use 3d touch for your reference.
https://www.y...
Date Added: 10/18/2022 by Geeetech Staff
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Will this work with a new ender 3 pro | 4.2.2 board 32 bit gd32f303 | ret6 cpu_br_Where will I find ...
Date Added: 10/17/2022 by Joe Shodds
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Yes, it can be used
Date Added: 10/10/2022 by Geeetech Staff
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi! Is the 3DTouch pin compatible with the Creality Sprite Extruder Pro Kit, and the 4.2.7 board? If...
Date Added: 10/05/2022 by Mike H
5pcs * Nozzle for A10M A20M A30M, A10T A20T A30T Printer, 0.4mm nozzle,Screw thread M7
hello , for registered shipping method, we will ship from China warehouse by China post, it need abo...
Date Added: 09/30/2022 by Geeetech Staff
5pcs * Nozzle for A10M A20M A30M, A10T A20T A30T Printer, 0.4mm nozzle,Screw thread M7
How long does it usually take to ship to the USA
Date Added: 09/30/2022 by Joshua Gibbs
Geeetech 3D Touch V3.2 Pro Auto Leveling Sensor
Hello,
yes, it can be used
Date Added: 09/29/2022 by Geeetech Staff
Geeetech 3D Touch V3.2 Pro Auto Leveling Sensor
Can i use this on my A10M has the 3D Touch 3.2 PRO same conectors and size as the normal 3d touch? i...
Date Added: 09/29/2022 by Ralph Elias
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
Hello, it can be used for A30 Pro.The material is brass, if you need other material, the size is Scr...
Date Added: 09/26/2022 by Geeetech Staff
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
Salve avendo l'intenzione di acquistare un ugello in acciaio per la mia a30 pro potete confermarmi l...
Date Added: 09/26/2022 by Chirico Vasti
1 Meter Transparent Teflon Tube+2 pcs PC04-M6, 2 pcs PC4-M8，2pcs PC4-01 Pneumatic Straight Push Fittings,pls write a comment for your order, let us know you need the pust fittings for which model printer
hello, yes , but only 2pcs PC4-01 push fittings can fit Mizar S.
other 2pcs are for printers like A...
Date Added: 09/20/2022 by Geeetech Staff
1 Meter Transparent Teflon Tube+2 pcs PC04-M6, 2 pcs PC4-M8，2pcs PC4-01 Pneumatic Straight Push Fittings,pls write a comment for your order, let us know you need the pust fittings for which model printer
Is this suitable for the Mizar S Auto-Leveling 3D Printer?
Date Added: 09/19/2022 by Jeremy Ford
{4KG}PLA (Blue + Green + Yellow + Purple) 3D Printer Filament 1.75mm 1kg/roll
hello， yes, we can make it for you , you can order this link item , but write a comment for your ord...
Date Added: 09/16/2022 by Geeetech Staff
{4KG}PLA (Blue + Green + Yellow + Purple) 3D Printer Filament 1.75mm 1kg/roll
can you make 2x Red and 2x Yellow ? pls
Date Added: 09/15/2022 by Thomas Paucke
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
hello Chirico, we only have brass nozzle.
Date Added: 09/13/2022 by Geeetech Staff
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
Esiste in acciaio_br_It exists in steel
Date Added: 09/11/2022 by Chirico Vasti
PETG Grey 3D Printer Filament 1.75mm 1kg/roll
Hello, the filaments are environmentally friendly
Date Added: 09/07/2022 by Geeetech Staff
PETG Grey 3D Printer Filament 1.75mm 1kg/roll
Can I use this filament for food container?
Date Added: 09/07/2022 by Régis LIÉVIN
PLA Black 3D Printer Filament 1.75mm 1kg/roll
hello，we only have config files for 3d printers . you can find it on our website Download area .
ht...
Date Added: 09/06/2022 by Geeetech Staff
PLA Black 3D Printer Filament 1.75mm 1kg/roll
could I have the config files for the PLA black, white and red filament?
Date Added: 09/05/2022 by noah seibel
Geeetech 3D Touch V3.2 Pro Auto Leveling Sensor
hello,pls ask the seller of the machine FLSUN printers if it supports 3dtouch or bltouch, if yes , t...
Date Added: 08/29/2022 by Geeetech Staff
Geeetech 3D Touch V3.2 Pro Auto Leveling Sensor
Will this work with the FLSUN printers? Plug in the robin_nano main board and flash the firmware to ...
Date Added: 08/27/2022 by Richard Slatin
PLA Purple 3D Printer Filament 1.75mm 1kg/roll
hello Sascha, mostly we will ship via DHL. but for some items that are only available in Spain wareh...
Date Added: 08/26/2022 by Geeetech Staff
PLA Purple 3D Printer Filament 1.75mm 1kg/roll
The delivery via GLS was much too long with over 10 days._br_With DHL it was much faster!
Date Added: 08/25/2022 by Sascha Wyffels
24V 15A DC power supply for A10 A10M A10T A20 A20M A20T
Hello, the power is 360W
Date Added: 08/25/2022 by Geeetech Staff
24V 15A DC power supply for A10 A10M A10T A20 A20M A20T
Is that power supply 320 watts? Thanks
Date Added: 08/24/2022 by Daniel Zurmühle
PETG White 3D Printer Filament 1.75mm 1kg/roll
Thanks a lot for your support, Rainer
Date Added: 08/24/2022 by Geeetech Staff
PETG White 3D Printer Filament 1.75mm 1kg/roll
Very nice and perfectly working filament with competitive price. I didn't expect this good quality. ...
Date Added: 08/24/2022 by Rainer Geiger
PLA Luminous Purple 3D Printer Filament 1.75mm 1kg/roll
hello,The luminous filament itself indeed looks white/transparent, it will glows in the dark only af...
Date Added: 08/23/2022 by Geeetech Staff
PLA Gradient Colour 3D Printer Filament 1.75mm 1kg/roll
hello, we shipped PLA green and super plate glass together , DHL paket : CS829673756DE
then PLA Col...
Date Added: 08/23/2022 by Geeetech Staff
PLA Luminous Purple 3D Printer Filament 1.75mm 1kg/roll
Buon giorno, l’ordine è arrivato con una bobina errata . Glow purple non è del colore giusto. La bob...
Date Added: 08/22/2022 by Andrew Zenobi
PLA Gradient Colour 3D Printer Filament 1.75mm 1kg/roll
j ai bien rec u les deux autre bobine et le plateau super plate pour la A30PRO
Date Added: 08/22/2022 by vincent lefebvre
PLA Gradient Colour 3D Printer Filament 1.75mm 1kg/roll
hello
PLA Color Gradient and Water Blue were shipped together,La Poste tracking number : 6A219269...
Date Added: 08/22/2022 by Geeetech Staff
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
Mizar S nozzle is not listed on our website yet , you can order this one , but write a comment for y...
Date Added: 08/22/2022 by Geeetech Staff
PLA Gradient Colour 3D Printer Filament 1.75mm 1kg/roll
a ce jour je n est pas recu la bobine
Date Added: 08/21/2022 by vincent lefebvre
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
Is this also for Mizar S?
Date Added: 08/20/2022 by Peter Chung
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
you are welcome
Date Added: 08/16/2022 by Geeetech Staff
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
Thanks :)
Date Added: 08/15/2022 by Filippo Bosi
PETG White 3D Printer Filament 1.75mm 1kg/roll
Thanks a lot for your supports, Julius
Date Added: 08/15/2022 by Geeetech Staff
PETG White 3D Printer Filament 1.75mm 1kg/roll
I ordered this filament yesterday and today it already came with DHL. I directly tested it and achie...
Date Added: 08/14/2022 by Julius Bonacker
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
Sorry we don't have 0.6mm nozzle
Date Added: 08/09/2022 by Geeetech Staff
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
Hi is it possible to have 0.6 nozzle instead of 0.4? I cannot find them on the store
Date Added: 08/06/2022 by Filippo Bosi
1m PTFE Teflon Tube Pipe 2*4mm For Filament
hello, you can order via this link directly.
or you need other ptfe tube which is different from th...
Date Added: 08/03/2022 by Geeetech Staff
1m PTFE Teflon Tube Pipe 2*4mm For Filament
I have a geeetech i3 printer and the hot end ptfe tube is blocked. it is for 1.75 filament. can you ...
Date Added: 08/03/2022 by kingsley burn
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
hello, no ,this is not compatible. if you need nozzles for MeCreator 2 printer , you can order this ...
Date Added: 08/02/2022 by Geeetech Staff
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
Is it compatible for the MeCreator 2???
Date Added: 08/01/2022 by James Prendergast
Stepper motor 42SHD0217-24BF
Yes
Date Added: 07/27/2022 by Geeetech Staff
Stepper motor 42SHD0217-24BF
Is it coming with the cable?
Date Added: 07/27/2022 by habil mohammed
5pcs * Nozzle for A10M A20M A30M, A10T A20T A30T Printer, 0.4mm nozzle,Screw thread M7
Hello, Marco, it already reach Netherlands,please wait for a few days, it will be reached in soon, h...
Date Added: 07/26/2022 by Geeetech Staff
5pcs * Nozzle for A10M A20M A30M, A10T A20T A30T Printer, 0.4mm nozzle,Screw thread M7
RG002529008CN take contact to post.nl ask them where the pachage is not deleverd._br__br_Gr. Marco
Date Added: 07/25/2022 by Marco Kersten
PLA Brown 3D Printer Filament 1.75mm 1kg/roll
Sorry, Joao, the filament don't have RGB codes
Date Added: 07/25/2022 by Geeetech Staff
PLA Black 3D Printer Filament 1.75mm 1kg/roll
Thanks a lot for your support Patrik, I will feedback your suggestion to our company
Date Added: 07/25/2022 by Geeetech Staff
PLA Black 3D Printer Filament 1.75mm 1kg/roll
Sehr gutes Filament._br_Nutze es jetzt schon sehr lange und habe nur sehr selten Probleme gehabt. Di...
Date Added: 07/22/2022 by Patrik Tinnemeyer
PLA Brown 3D Printer Filament 1.75mm 1kg/roll
is there any way to get the RGB codes for the filament colors? trying to achieve the color code whil...
Date Added: 07/22/2022 by João Xabregas
Geeetech 3D Touch V3.2 Pro Auto Leveling Sensor
Hello, Steven, you can order SKU: 700-001-0969
https://www.geeetech.com/geeetech-3d-touch-v32-auto...
Date Added: 07/19/2022 by Geeetech Staff
Geeetech 3D Touch V3.2 Auto Leveling Sensor
You are welcome, thanks a lot for your support, Neal
Date Added: 07/19/2022 by Geeetech Staff
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
You are welcome, thanks a lot for your support, Neal
Date Added: 07/19/2022 by Geeetech Staff
1m PTFE Teflon Tube Pipe 2*4mm For Filament
You are welcome,Neal, thanks a lot for your support
Date Added: 07/19/2022 by Geeetech Staff
Geeetech 3D Touch V3.2 Pro Auto Leveling Sensor
Does this sensor works with the "older" Geeetech A30 printer (hardware version 3.3 and firmware vers...
Date Added: 07/19/2022 by Steven Achilles
1m PTFE Teflon Tube Pipe 2*4mm For Filament
exactly what i needed,thanks
Date Added: 07/19/2022 by Neal Hennessey
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
once again the items arrived in good condition and on time,thank you geeetech.
Date Added: 07/19/2022 by Neal Hennessey
Geeetech 3D Touch V3.2 Auto Leveling Sensor
the item arrived in good condition and on time,thanks
Date Added: 07/19/2022 by Neal Hennessey
Acrylic Prusa I3 PRO B 3D Printer DIY kit
hello, do you want to order PRO B printer lcd screen ? it is not listed on our store , pls order bel...
Date Added: 07/11/2022 by Geeetech Staff
PLA Black 3D Printer Filament 1.75mm 1kg/roll
Thanks a lot for your support, Niklas
Date Added: 07/11/2022 by Geeetech Staff
Acrylic Prusa I3 PRO B 3D Printer DIY kit
hi what lcd screen in i3b for marlin please
Date Added: 07/10/2022 by Crispin Church
PLA White 3D Printer Filament 1.75mm 1kg/roll
Hi Niklas， Thank you for your support and trust
Date Added: 07/05/2022 by Geeetech Staff
PLA White 3D Printer Filament 1.75mm 1kg/roll
Good quality. Thank you
Date Added: 07/05/2022 by Niklas Weimann
PLA Black 3D Printer Filament 1.75mm 1kg/roll
sorry , we do not have Simplify3D file. you can refer to cura's configuration file
https://www.geee...
Date Added: 07/01/2022 by Geeetech Staff
PLA Black 3D Printer Filament 1.75mm 1kg/roll
May I get the Simplify3D pla profile as well. I have the new black and new white.
Date Added: 06/30/2022 by Otto Dieffenbach
PLA Silk Rainbow 3D Printer Filament 1.75mm 1kg/roll
hello Tyler, it was shipped separately , UPS tracking number : 1Z4X554V0302769058
you can track it...
Date Added: 06/22/2022 by Geeetech Staff
PLA Silk Rainbow 3D Printer Filament 1.75mm 1kg/roll
Didnt show up in my order very disappointed it shows i paid for it as well
Date Added: 06/22/2022 by Tyler Jennings
Stepper motor wire
hello, seems you need extruder cable . it is not listed on our store ,pls contact sales@geeetech.com...
Date Added: 06/20/2022 by Geeetech Staff
Stepper motor wire
Es ist nicht für Achsen sondern für den Extruder 1(E0)
Date Added: 06/18/2022 by Kai Diehl
Stepper motor wire
Kai, is it for X axis, Y axis, or Z axis?
Date Added: 06/18/2022 by Geeetech Staff
Stepper motor wire
Danke für die schnelle Info hier die Daten_br_GT2560 V4.1 /Baud 250000 Fw V 2.2 HW V2.20 Protocol1_b...
Date Added: 06/18/2022 by Kai Diehl
Stepper motor wire
Hello, Kai
it is not suitable for A20T,please confirm your motherboard verson? And the wire for whi...
Date Added: 06/17/2022 by Geeetech Staff
1 Meter 2GT Belt (sold by meter)
yes , it fits
Date Added: 06/17/2022 by Geeetech Staff
1 Meter 2GT Belt (sold by meter)
Does it fit Mizar S?
Date Added: 06/16/2022 by Peter Chung
Stepper motor wire
Passt es beim A20t
Date Added: 06/16/2022 by Kai Diehl
Stepper motor 42SHD0217-24BF
hello, you can order any motor on our wesbite ,but write a comment for your order, need A20M motor 4...
Date Added: 06/14/2022 by Geeetech Staff
Displaying 1301 to 1400 (of 2235 reviews)
TOP